Sneaza Intercooler install

[PrivateAlbum]  Category: General
Please Note
You are viewing the old SCORE Albums, which no longer accept new photos and existing photos/captions cannot be deleted/edited. Please use the new Gallery.

Postby Dave Crompton

24 photo's so far.

The suppliers:

Mock-up pipes - [b:9988776655]Me[/b:9988776655] :D
Intercooler - [b:9988776655]Justjap[/b:9988776655] Ph:02 9545 0532
Silicon hoses - [b:9988776655]Motorsport Connections[/b:9988776655] Ph:02 9838 7272
Air con. Fitting- [b:9988776655]Hills District Radiator Service[/b:9988776655] Ph:02 9636 3041
Intercooler Pipes - [b:9988776655]Carline[/b:9988776655] Ph:02 9677 2227

I hope this helps, B.T.W.These are Sydney phone numbers,for those unaware :)

Postby Dave Crompton » Tue Apr 11, 2006 00:25

Passenger side.
Click here to enlarge this photo

Postby Dave Crompton » Tue Apr 11, 2006 00:26

And another one, showing the Air-con. pipes and clearances.
Click here to enlarge this photo

Postby Dave Crompton » Tue Apr 11, 2006 00:31

Well thats it, exept for the Diving lights, which can now be fixed to the bottom mounting points on the intercooler. After fitting them here, decide they would be removed at the first sign of a deep gutter, so fashioned two brackets ( using my trusty Aluminium flat bar ), and using the same mount points, brought them closer to the car body.
Click here to enlarge this photo

Postby Dave Crompton » Tue Apr 11, 2006 00:42

Bumper back in place, Driving lights soon to be attached, Number plate returned, now just need to pop down the road to get the Air -con, re-gassed and some new mesh. Hopefully the number plate won't be to restrictive to the airflow or that will be next on the list.

By the way, the plastic 'Shroud' that adorns the bottom of the engine needs to be removed for this install, but I will be putting this back on as soon as I have modified it to accomodate the new pipes. I called the pipes 'Proto-type' because I intend to have a set made from alloy and polished, just in case you were wondering. Now off to the M4, to see how she blows :D :D :twisted: :twisted: :twisted:
Click here to enlarge this photo

Postby Dave Crompton » Wed Apr 19, 2006 01:18

With the New Aluminium mesh and the Driving Lights installed, I will now have to make a Shroud for the Lights.
Click here to enlarge this photo

Postby Dave Crompton » Wed Apr 19, 2006 01:20

....Right after I finish making the Shroud to cover the GAP.
Click here to enlarge this photo

Postby Dave Crompton » Wed Apr 19, 2006 01:22

Aluminium Flashing moulded, add 1st layer of Fibreglass...
Click here to enlarge this photo

Postby Dave Crompton » Wed Apr 19, 2006 01:25

Trimmed to shape, :D can now add where needed and remove where not.....Watch this space for finished product. :twisted:
Click here to enlarge this photo

Who is online

Registered users: No registered users